Abstract
An efficient connection of integrated optical components and photo-detectors (PDs) is very important to realize small size and high functionality optoelectronic devices. A number of techniques have been reported to provide such a connection. One of these uses a focusing grating coupler on top of a waveguide (WG) to focus the light to the PD above the WG [1]. However, high volume production of such devices is not possible because no mask can be used to define the grating, owing to its relatively small period. Another technique uses a focused ion beam to mill total internal reflection (TIR) mirrors, but this technique is also not suitable for high volume production [2]. The third technique is based on a metal mirror, at which the desired mirror angle is fabricated by using a superficial layer in the wet etching process [3]. The efficiency of the mirrors is very high, but the thermal budget of the fabrication process is low because the melting temperature of metal layer used in the mirror is low.
© 2011 Optical Society of America
PDF ArticleMore Like This
Ter-Hoe Loh, Qian Wang, Keh-Ting Ng, Yi-Cheng Lai, and Seng-Tiong Ho
FWU1 Frontiers in Optics (FiO) 2011
J.-M. Fedeli, L. Liu, L. Grenouillet, D. Bordel, F. Mandorlo, N. Olivier, T. Spuesens, P. Régreny, P. Grosse, P. Rojo-Romeo, R. Orobtchouk, and D. Van Thourhout
OMM3 Optical Fiber Communication Conference (OFC) 2011
Jong-Hoi Kim, Joong-Seon Choe, Kwang-Seong Choi, Chun-Ju Youn, Duk-Jun Kim, Sun-Hyok Jang, Yong-Hwan Kwon, and Eun-Soo Nam
830824 Asia Communications and Photonics Conference and Exhibition (ACP) 2011