Abstract
Highly excited wide-gap dielectrics are well suited to study the evolution of non-equilibrium conduction band electrons in solids. Compared to semiconductors, the measurable quantities in femtosecond pump-probe experiments – transient reflection (R) and transmission (T) – are less affected by processes such as gap shrinkage and band filling, simplifying the data interpretation. The measurements were performed on three oxides (TiO2, Ta2O5 and HfO2) thin films (~ 500 nm) with different band gaps (3.3 eV, 3.8 eV, 5.1 eV). Pulses at 800 nm and 25 fs duration excited the samples to ~60% of the threshold for dielectric breakdown. Besides their technical importance as optical coatings, we chose thin films to avoid self-focusing. The difficulty when working with thin films is the presence of standing waves (Fabry-Perot effects) of pump and probe, strongly influencing the transmission and reflection behavior after excitation. An algorithm to retrieve the change of the complex dielectric constant, ∆ε(t)= ∆εR(t) − i∆ε(t), from measured ∆R(t) and ∆T(t) data was developed [1]. This algorithm calculates the optical response of the film due to the periodic excitation by the pump through multi-photon absorption and impact ionization. Detailed studies were performed to characterize and maximize the stability of the algorithm with respect to experimental uncertainties. Figure 1 shows the so obtained time dependent dielectric function for two samples.
© 2003 Optical Society of America
PDF ArticleMore Like This
M. Mero, J. Liu, A. J. Sabbah, J. Zeller, W. Rudolph, K. Starke, and D. Ristau
MT15 Frontiers in Optics (FiO) 2003
Simin Zhang, Noah Talisa, Carmen S. Menoni, Vitaly E. Gruzdev, and Enam Chowdhury
JTh2C.1 CLEO: Applications and Technology (CLEO:A&T) 2020
Mark Mero, Jianhua Liu, Ali J. Sabbah, Benjamin Clapp, Jayesh Jasapara, and Wolfgang Rudolph
FB1 Optical Interference Coatings (OIC) 2007