Abstract
We demonstrate the fabrication of a 2×2 cross-point switch monolithically fabricated on the Passive Active Resonant Coupler (PARC) platform. PARC utilized vertical coupling between an active and a passive waveguide using “resonance” over a taper. The coupling taper was 100 µm long with less than 0.15 dB coupling loss. By pushing the mode up and down as and when required, we are able to integrate passive waveguides and electroabsorption modulators on one chip. The static performance of the switch has been tested, and a modulation depth of 30 dB has been achieved at the wavelength of 1.57 µm for an applied bias of 2.5 V.
© 2000 Optical Society of America
PDF ArticleMore Like This
S. S. Saini, Z. Dilli, F. G. Johnson, D. R. Stone, H. Shen, W. Zhou, and M. Dagenais
IThG3 Integrated Photonics Research (IPR) 2000
S. S. Saini, M. Dagenais, F. G. Johnson, D. R. Stone, H. Shen, W. Zhou, and J. Pamulapati
CMA7 Conference on Lasers and Electro-Optics (CLEO:S&I) 2000
S.S. Saini, Y. Hu, Z. Dilli, R. Grover, M. Dagenais, F.G. Johnson, D.R. Stone, H. Shen, W. Zhou, and J. Pamulapati
CThG6 Conference on Lasers and Electro-Optics (CLEO:S&I) 2000