Abstract
Radiation dose measurements based on scintillator detection are conveniently made by coupling the light from the scintillator into an optical fiber. The low light levels involved typically require sensitive photodetectors, so it is advantageous to increase the available signal by optimizing the optical coupling efficiency between the scintillator and optical fiber. We model thisprocess using geometric optics and finite-element ray tracing to determine the features that maximize the amount of light coupled to an optical fiber from a cylindrical scintillator. We also address whether the coupling can be improved by using an intermediate optical element such as a lens, and we provide a means for calculating its required optical properties for a given geometry.
© 2007 Optical Society of America
Full Article | PDF ArticleMore Like This
Alexandre M. C. Santos, Mohammad Mohammadi, and Shahraam Afshar
Opt. Express 22(4) 4559-4574 (2014)
Qin Zhuang, Hu Yaosheng, Ma Yu, Zhao Wenhui, Sun Weimin, Zhang Daxin, Chen Ziyin, and Lewis Elfed
Opt. Express 24(5) 5172-5185 (2016)
Wook Jae Yoo, Sang Hun Shin, Dayeong Jeon, Seunghan Hong, Seon Geun Kim, Hyeok In Sim, Kyoung Won Jang, Seunghyun Cho, and Bongsoo Lee
Opt. Express 21(23) 27770-27779 (2013)