Abstract
Defect free masks remain one of the most significant challenges facing the commercialization of extreme ultraviolet (EUV) lithography. Progress on this front requires high-performance wavelength-specific metrology of EUV masks, including high-resolution and aerial-image microscopy performed near the wavelength. Arguably the most cost-effective and rapid path to proliferating this capability is through the development of Fresnel zoneplate-based microscopes. Given the relative obscurity of such systems, however, modeling tools are not necessarily optimized to deal with them and their imaging properties are poorly understood. Here we present a modeling methodology to analyze zoneplate microscopes based on commercially available optical modeling software and use the technique to investigate the imaging performance of an off-axis EUV microscope design. The modeling predicts that superior performance can be achieved by tilting the zoneplate, making it perpendicular to the chief ray at the center of the field, while designing the zoneplate to explicitly work in that tilted plane. Although the examples presented here are in the realm of EUV mask inspection, the methods described and analysis results are broadly applicable to zoneplate microscopes in general, including full-field soft-x-ray microscopes rou tinely used in the synchrotron community.
© 2011 Optical Society of America
Full Article | PDF ArticleMore Like This
Patrick P. Naulleau, Christopher N. Anderson, Erik H. Anderson, Nord Andreson, Weilun Chao, Changhoon Choi, Kenneth A. Goldberg, Eric M. Gullikson, Seong-Sue Kim, Donggun Lee, Ryan Miyakawa, Jongju Park, Seno Rekawa, and Farhad Salmassi
Opt. Express 22(17) 20144-20154 (2014)
Michael Goldstein and Patrick Naulleau
Opt. Express 20(14) 15752-15768 (2012)
Kenji Yamazoe, Iacopo Mochi, and Kenneth A. Goldberg
J. Opt. Soc. Am. A 31(12) B34-B43 (2014)