Abstract
We present an erratum to our recent work [Appl. Opt. 60, 10862 (2021) [CrossRef] ] that corrects errors in Fig. 4 and the body of the paper. The corrections do not affect the results and conclusions of the original paper.
© 2022 Optica Publishing Group
Errors have been found in Fig. 4 and a sentence of our paper [1]. In Fig. 4, the period of the probe laser should be “6 ms” rather than the marked “13 ms”. The Fig. 4 is corrected as shown here.
In Section 3, “The 420 nm probe laser is a square wave signal with a pulse width of 3 ms and a period of 13 ms, which is sufficient longer than pump pulse and controlled by the chopper 1” should be corrected as: “The 420 nm probe laser is a square wave signal with a pulse width of 3 ms and a period of 6 ms, which is sufficient longer than pump pulse and controlled by the chopper 1.”
The errors do not influence the results and conclusions of the original paper.
Reference
1. H. Zhao, H. Wang, H. Tang, L. Li, Z. Yang, W. Yang, K. Han, and X. Xu, “Fast on-line Rubidium DPAL atomic concentration measurement by 420 nm probe laser,” Appl. Opt. 60, 10862–10866 (2021). [CrossRef]