Abstract
Wave-front distortion compensation using direct system performance metric optimization is studied both theoretically and experimentally. It is shown how different requirements for wave-front control can be incorporated, and how information from different wave-front sensor types can be fused, within a generalized gradient descent optimization paradigm. In our experiments a very-large-scale integration (VLSI) system implementing a simultaneous perturbation stochastic approximation optimization algorithm was applied for real-time adaptive control of multielement wave-front correctors. The custom-chip controller is used in two adaptive laser beam focusing systems, one with a 127-element liquid-crystal phase modulator and the other with beam steering and 37-control channel micromachined deformable mirrors. The submillisecond response time of the micromachined deformable mirror and the parallel nature of the analog VLSI control architecture provide for high-speed adaptive compensation of dynamical phase aberrations of a laser beam under conditions of strong intensity scintillations. Experimental results demonstrate improvement of laser beam quality at the receiver plane in the spectral band up to 60 Hz.
© 2000 Optical Society of America
Full Article | PDF ArticleMore Like This
Mikhail A. Vorontsov
J. Opt. Soc. Am. A 19(2) 356-368 (2002)
Miao Yu and Mikhail A. Vorontsov
J. Opt. Soc. Am. A 21(9) 1645-1658 (2004)
M. A. Vorontsov and V. P. Sivokon
J. Opt. Soc. Am. A 15(10) 2745-2758 (1998)