Abstract
Diameter is a critical parameter for determining the physical properties of a submicrometer optical fiber and requires an accurate measurement. In this study, we proposed, to our knowledge, a novel diameter measurement technique derived from the waveguide theory, utilizing the pitch of a standing-wave near-field light generated by two counter-propagating lights within the submicrometer optical fiber. In a submicrometer optical fiber, the propagating light extends into the surrounding air as near-field light, existing within a range approximately equivalent to one wavelength from the surface of the fiber. By generating the standing-wave near-field light with the incident lights from both ends of the fiber, the pitch of the standing-wave near-field light can be measured by scanning along the fiber’s central axis with a scanning near-field optical microscopy probe. The fiber diameter is subsequently acquired by solving the optical fiber eigenvalue equation. Based on the feasibility verification experiment, a high-precision measurement of approximately 0.50 µm was realized for the diameter of the optical fiber.
© 2024 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Meiling Jiang, Mingsi Zhang, Fei Xie, Fei Qin, Li-peng Sun, Xiangping Li, and Yaoyu Cao
Opt. Lett. 49(2) 318-321 (2024)
Zhenyu Wan, Ziyi Tang, and Jian Wang
Opt. Lett. 49(4) 927-930 (2024)
Keying Liu, Yuhang Li, Mingjin Gao, Jianbin Zhang, Peizhen Xu, Xin Guo, Qiang Liu, and Limin Tong
Opt. Lett. 49(4) 895-898 (2024)