Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Picosecond pulse amplification using pulse compression techniques

Not Accessible

Your library or personal account may give you access

Abstract

In the laser field, scientists working in amplification of picosecond and femtosecond pulses have been confronted with an issue similar to the one faced by scientists in the radar field 30 years ago. Because of peak power limitations, short pulses could not be amplified efficiently. In the radar field this problem was circumvented by chirping and stretching the input pulse before amplification.1-5 The amplification being done at a much lower peak power, more efficient extraction could be done. After amplification the pulse was compressed to a value c* 1/AF, where AF is the total frequency chirp.

© 1986 Optical Society of America

PDF Article
More Like This
Picosecond Pulse Amplification Using Pulse Compression Techniques

D. Strickland, P. Maine, M. Bouvier, S. Williamson, and G. Mourou
TuB1 International Conference on Ultrafast Phenomena (UP) 1986

Generation of ultrahigh peak power pulses with the technique of chirped pulse amplification

D. Strickland, P. Maine, and G. Mourou
THM3 OSA Annual Meeting (OAM) 1986

Compression and amplification of weak picosecond optical pulses using semiconductor laser amplifiers

GOVIND P. AGRAWAL and N. A. OLSSON
THI5 Conference on Lasers and Electro-Optics (CLEO) 1989

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved