Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2015 Conference on Lasers and Electro-Optics Pacific Rim
  • (Optica Publishing Group, 2015),
  • paper 26P_83

Maximization of the ablation rate of metal, semiconductor and dielectric with a MHz repetition rate ultrafast laser

Not Accessible

Your library or personal account may give you access

Abstract

Maximization of the ablation rate of various materials was investigated by optimization of ultrafast laser parameters. The optimized parameters were used to engrave metal roles for micron-sized pattern transfer of conductive ink to flexible substrates.

© 2015 IEEE

PDF Article
More Like This
Femtosecond Laser Damage at kHz and MHz Repetition Rates

B. J. Nagy, L. Vámos, D. Oszetzky, P. Rácz, L. Gallais, and P. Dombi
CA_P_35 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2015

Low-Repetition-Rate (112 MHz) High-Peak-Power Modelocked Semiconductor Disk Laser in a Multipass Cavity Geometry

Loyd J. McKnight, Peter J. Schlosser, Alexander A. Lagatsky, Martin D. Dawson, and John-Mark Hopkins
CB_3_5 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2015

The influence of ambient temperature on femtosecond laser ablation of semiconductor and metal

J. S. Yahng, J. R. Nam, T. O. Yoon, and S. C. Jeoung
WP_054 Conference on Lasers and Electro-Optics/Pacific Rim (CLEOPR) 2007

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved