Abstract

A novel method was proposed to improve hydrogen sensitive performance of fiber Bragg grating (FBG) hydrogen sensor. The hydrogen performance of the sensor can be greatly improved by using WO3-Pd2Pt-Pt composite films as sensing element. The high reflective Bragg gratings was written in single mode fiber. The end-face of single mode fiber was deposited with WO3-Pd2Pt-Pt composite films as sensing element. The peak intensity of high reflective FBG is employed for reference, while that of baseline intensity of reflected light source is used as hydrogen characterization. The experimental results prove the resolution of the hydrogen sensing system can reach to 5 ppm, and the proposed sensor displays good repeatability during the hydrogen response.

© 2017 Optical Society of America

PDF Article
More Like This
Sensitivity Improvement of Pd Coated Side-Polished Optical Fiber Hydrogen Sensors

Santosh Kumar Chaurasia and Mukesh P. Singh
P1A.3 International Conference on Fibre Optics and Photonics (Photonics) 2016

Research on Reflectivity of Chemical Composition Grating Sensors at High Temperatures

Guoyu Li and Bai-ou Guan
79860U Asia Communications and Photonics Conference and Exhibition (ACP) 2010

Multimode fiber tapers coated with Pd composite thin films for hydrogen gas sensing

Donato Luna-Moreno, Carlos Juárez-Lora, and David Monzón-Hernández.
TuE67 Optical Fiber Sensors (OFS) 2006

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription