Abstract
The use of sol-gel methods to make titanium silicate gradient-index (GRIN) glass is now well established [1-9]. The basic technique consists of the following steps: 1) make a titanium silicate gel from Si and Ti alkoxides, 2) soak the gel in an acid bath to partly leach and thus create a concentration gradient of Ti, 3) arrest the leaching process by soaking the gel in an appropriate solvent such as alcohol or water, 4) dry the gel, 5) sinter the gel by controlled heating to a high temperature. This technique can be used to produce transparent monolithic radial gradient-index glass rods up to 8mm or more in diameter with a nearly parabolic index profile. A drawback of this technique is that the concentration of titania in the final glass article is limited by devitrification to less than 10 mole percent. As a result, the largest index change so far achieved in the TiO2-SiO2 system is about 0.027 [8].
© 1994 Optical Society of America
PDF ArticleMore Like This
J. Brian Caldwell, John Diana, and Duncan T. Moore
TUU8 OSA Annual Meeting (FIO) 1987
Wei-Chih Cheng, Chun-Chin Tsai, Shi-Sheng Hu, Jin-Kai Chang, Yu-Lun Lin, Li-Yin Chen, Yi-Chung Huang, Yi-Cheng Hsu, and Wood-Hi Cheng
TuPL_17 OptoElectronics and Communications Conference and Photonics in Switching (OECC) 2013
Christopher E. Saxer and D. T. Moore
GWA5 Gradient-Index Optical Imaging Systems (GIOIS) 1994