Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Thermal lensing and power scaling of a AgGaSe2 OPO

Open Access Open Access

Abstract

The 2-μm pumped AgGaSe2 OPO is currently limited to outputs below 1 W and pulse recognition frequencies of a few kilohertz, apparently because of thermal lensing. Conflicting values for K and dn/dT and the lack of accurate 2-μm absorption data have severely hampered predictions of thermal focusing from material properties. We present results of polarized 2-μm laser calorimetry and extracavity thermal lens measurements on AgGaSe2 samples grown at two laboratories over the past 5 years. We show that the 2-μm absorption is due primarily to an e-polarized extrinsic band. Even for our best material, the thermal focal length can be comparable to the crystal length (in a typical OPO configuration) at pump powers of only a few watts. We find no astigmatism due to crystalline anisotropy, and we demonstrate the possibility of intracavity optical compensation. We have also achieved an order of magnitude reduction in thermal focusing by cooling the crystal to 77 K.

© 1992 Optical Society of America

PDF Article
More Like This
Transient thermal lensing in ZnGeP2 OPO material

J. E. Tucker, C. L. Marquardt, S. R. Bowman, and B. J. Feldman
CWK5 Conference on Lasers and Electro-Optics (CLEO:S&I) 1995

High repetition rate AgGaSe2 optical parametric oscillator

P. A. Budni, M. G. Knights, E. P. Chicklis, and K. L. Schepler
TuWW4 OSA Annual Meeting (FIO) 1992

AgGaSe2 OPO Pumped by a LiNbO3 OPO

J. Raffy, T. Debuisscheit, J.-P. Pocholle, and M. Papuchon
NF5 Advanced Solid State Lasers (ASSL) 1993

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.