Abstract

The curing characteristics of an ultraviolet (UV) ink layer are of utmost importance for the development of UV inks. Measuring either bulk or bottom cure in itself is not new and has been the subject of many articles. In this article, two methods are described based on Fourier transform infrared (FT-IR) spectrometry to measure in real time and simultaneously the bulk and bottom cure of a thin UV ink layer. The procedure consists of applying a thin (10–12 µm) layer of UV-curing ink on an attenuated total reflection (ATR) crystal. The bottom cure is measured with ATR. The bulk cure is measured simultaneously with a reflection analysis (method 1) or a transmission analysis (method 2). With both methods, the bulk and bottom cure can be determined. To overcome problems with the interference in the ATR reflection setup, it is recommended to use the ATR transmission setup.

© 2017 The Author(s)

Preparation and performance of ultraviolet curable silicone resins used for ultraviolet cured coating and ultraviolet-assisted 3D printing materials

Xiongfa Yang, Qiong Chen, Haoyuan Bao, Jiangling Liu, Yufei Wu, and Guoqiao Lai
OSA Continuum 1(2) 542-552 (2018)

New trends in the application of Fourier transform infrared spectroscopy to analytical chemistry

Tomas Hirschfeld
Appl. Opt. 17(9) 1400-1412 (1978)

Passive Fourier-transform infrared spectroscopy of chemical plumes: an algorithm for quantitative interpretation and real-time background removal

Mark L. Polak, Jeffrey L. Hall, and Kenneth C. Herr
Appl. Opt. 34(24) 5406-5412 (1995)

Methodology for computing Fourier-transform infrared spectroscopy interferograms

B. N. Carnio, O. Moutanabbir, and A. Y. Elezzabi
Appl. Opt. 62(17) 4518-4523 (2023)

Terahertz time-domain spectroscopy for monitoring the curing of dental composites

Michael Schwerdtfeger, Sina Lippert, Martin Koch, Andreas Berg, Stefan Katletz, and Karin Wiesauer
Biomed. Opt. Express 3(11) 2842-2850 (2012)