Abstract

A resonant fiber-optic gyroscope (RFOG) based on a broadband source can avoid the fundamental drawback of coherence detection processing while possessing the greater sensitivity afforded by the finesse of the fiber-optic ring resonator. In this paper, the basic operation principle is presented and demonstrated in detail, and various noise sources, as well as the temperature effect encountered in this broadband source-driven RFOG, are studied and analyzed. Then a combined modulation technique is proposed to suppress the residual backscattering noise. To further reduce the effect of temperature transience, an asymmetric fiber ring resonator is designed. In the experiment, a bias stability of 0.01°/h is successfully demonstrated with a 100 m-long fiber ring resonator of 8 cm diameter in a laboratory environment without temperature control.

© 2022 Optica Publishing Group

Navigation-grade resonant fiber-optic gyroscope using ultra-simple white-light multibeam interferometry

Shuangxiang Zhao, Qingwen Liu, Yuanyuan Liu, Huilian Ma, and Zuyuan He
Photon. Res. 10(2) 542-549 (2022)

Resonant fiber optical gyroscope using the single-mode fiber ring resonator

Lu Liu, Shuang Liu, Weiwen Qian, Hanzhao Li, and Huilian Ma
Appl. Opt. 60(23) 6755-6760 (2021)

Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique

Lu Liu, Shuang Liu, Junyi Hu, Huilian Ma, and Zhonghe Jin
Opt. Express 30(7) 12192-12203 (2022)

Suppressing backscattering noise of a resonant fiber optic gyroscope using coherent detection

Lu Liu, Hanzhao Li, Shuang Liu, Zhonghe Jin, and Huilian Ma
Appl. Opt. 61(15) 4421-4428 (2022)

Improving thermal stability of a resonant fiber optical gyroscope using triple closed loops

Lu Liu, Junyu Tu, Sen Ye, and Huilian Ma
Appl. Opt. 59(35) 11013-11018 (2020)