Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

High-bandwidth image-based predictive laser stabilization via optimized Fourier filters

Abstract

Controlling the delivery of kHz-class pulsed lasers is of interest in a variety of industrial and scientific applications, from next-generation laser-plasma acceleration to laser-based x-ray emission and high-precision manufacturing. The transverse position of the laser pulse train on the application target is often subject to fluctuations by external drivers (e.g., room cooling and heating systems, motorized optics stages and mounts, vacuum systems, chillers, and/or ground vibrations). For typical situations where the disturbance spectrum exhibits discrete peaks on top of a broad-bandwidth lower-frequency background, traditional PID (proportional-integral-derivative) controllers may struggle, since as a general rule PID controllers can be used to suppress vibrations up to only about 5%–10% of the sampling frequency. Here, a predictive feed-forward algorithm is presented that significantly enhances the stabilization bandwidth in such laser systems (up to the Nyquist limit at half the sampling frequency) by online identification and filtering of one or a few discrete frequencies using optimized Fourier filters. Furthermore, the system architecture demonstrated here uses off-the-shelf CMOS cameras and piezo-electric actuated mirrors connected to a standard PC to process the alignment images and implement the algorithm. To avoid high-end, high-cost components, a machine-learning-based model of the piezo mirror’s dynamics was integrated into the system, which enables high-precision positioning by compensating for hysteresis and other hardware-induced effects. A successful demonstration of the method was performed on a 1 kHz laser pulse train, where externally-induced vibrations of up to 400 Hz were attenuated by a factor of five, far exceeding what could be done with a standard PID scheme.

© 2023 Optica Publishing Group

Full Article  |  PDF Article
More Like This
Vibration rejection of phased array telescope systems via disturbance-propagation-characteristics-based feedforward control

Qiong Tu, Rong-Qi Ma, Qiang Wang, Yong-Mei Huang, Jian-Liang Shi, Liang-Zhu Yuan, Jin-Ying Li, Kai-Yuan Yang, Yang Li, and Wei Tang
Appl. Opt. 62(21) 5696-5706 (2023)

Laboratory demonstration of the prediction of wind-blown turbulence by adaptive optics at 8  kHz with use of LQG control

Lisa A. Poyneer, S. Mark Ammons, Mike K. Kim, Brian Bauman, Jesse Terrel-Perez, Aaron J. Lemmer, and Jayke Nguyen
Appl. Opt. 62(8) 1871-1885 (2023)

Supplementary Material (9)

NameDescription
Data File 1       Centroid values of the correction of a 210Hz disturbance, with a Fourier filter of window length 30.
Data File 2       The magnitude of the disturbance spectrum when no there is no correction.
Data File 3       Centroid values of the correction of a 250Hz disturbance, with a Fourier filter of window length 25.
Data File 4       The magnitude of the disturbance spectrum when no there is no correction.
Data File 5       Centroid values of the correction of a 370Hz disturbance, with a Fourier filter of window length 54.
Data File 6       The magnitude of the disturbance spectrum when no there is no correction.
Data File 7       The DAC commands are 12-bit integers that drive a mirror along one axis. The centroids are the laser beam locations as measured in pixels by a camera along the corresponding axis.
Data File 8       Loop times for the stabilization system, using two different computer systems
Supplement 1       Supplement document for kHz rep-rate laser pointing stability manuscript

Data availability

Data underlying the results presented in this paper are available in Refs. [29]–[36].

29. J. Natal, S. Barber, F. Isono, C. Berger, A. Gonsalves, M. Fuchs, and J. van Tilborg, “Data File 1: Centroid values of the correction of a 210 Hz disturbance, with a Fourier filter of window length 30,” figshare, 2022, https://doi.org/10.6084/m9.figshare.20630292.

36. J. Natal, S. Barber, F. Isono, C. Berger, A. Gonsalves, M. Fuchs, and J. van Tilborg, “Data File 8: Loop times for the stabilization system, using two different computer systems,” figshare, 2022, https://doi.org/10.6084/m9.figshare.20631216.

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (13)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.