Abstract

During optical monitoring using broadband transmittance measurement, the accuracy depends on how both the substrate and the optical path are aligned. We present a correction procedure to improve the accuracy of the monitoring, even if the substrate has features such as absorption or if there is misalignment of the optical path. The substrate in this case can either be a test glass or a product. The algorithm is proven by experimental coatings which were produced with and without the correction. Additionally, the optical monitoring system was also used to perform an in situ quality check. The system allows a detailed spectral analysis of all substrates with a high position resolution. Both plasma and the temperature effects on the central wavelength of a filter are identified. This knowledge enables the optimization of the following runs.

© 2023 Optica Publishing Group

Optical thickness monitoring sensitivity improvement using graphical methods

Ronald R. Willey
Appl. Opt. 26(4) 729-737 (1987)

Computational experiments on optical coating production using monochromatic monitoring strategy aimed at eliminating a cumulative effect of thickness errors

Alexander V. Tikhonravov, Michael K. Trubetskov, and Tatiana V. Amotchkina
Appl. Opt. 46(28) 6936-6944 (2007)

Advantages and challenges of optical coating production with indirect monochromatic monitoring

Jinlong Zhang, Chong Cao, Alexander V. Tikhonravov, Michael K. Trubetskov, Artur Gorokh, Xinbin Cheng, and Zhanshan Wang
Appl. Opt. 54(11) 3433-3439 (2015)

Photometric calibration of an in situ broadband optical thickness monitoring of thin films in a large vacuum chamber

David Hofman, Benoit Sassolas, Christophe Michel, Laurent Balzarini, Laurent Pinard, Julien Teillon, Bertrand David, Bernard Lagrange, Eleonore Barthelemy-Mazot, and Gianpietro Cagnoli
Appl. Opt. 56(3) 409-416 (2017)

Interest of broadband optical monitoring for thin-film filter manufacturing

Bruno Badoil, Fabien Lemarchand, Michel Cathelinaud, and Michel Lequime
Appl. Opt. 46(20) 4294-4303 (2007)