Abstract

This study describes changes observed in the near-infrared (NIR) diffuse reflectance (DR) spectra of pharmaceutical tablets after these tablets were subjected to different levels of strain (exposure to shear) during the mixing process. Powder shearing is important in the mixing of powders that are cohesive. Shear stress is created in a system by moving one surface over another causing displacements in the direction of the moving surface and is part of the mixing dynamics of particulates in many industries including the pharmaceutical industry. In continuous mixing, shear strain is developed within the process when powder particles are in constant movement and can affect the quality attributes of the final product such as dissolution. These changes in the NIR spectra could affect results obtained from NIR calibration models. The aim of the study was to understand changes in the NIR diffuse reflectance spectra that can be associated with different levels of strain developed during blend shearing of laboratory samples. Shear was applied using a Couette cell and tablets were produced using a tablet press emulator. Tablets with different shear levels were measured using NIR spectroscopy in the diffuse reflectance mode. The NIR spectra were baseline corrected to maintain the scattering effect associated with the physical properties of the tablet surface. Principal component analysis was used to establish the principal sources of variation within the samples. The angular dependence of elastic light scattering shows that the shear treatment reduces the size of particles and produces their uniform and highly isotropic distribution. Tablet compaction further reduces the diffuse component of scattering due to realignment of particles.

© 2016 The Author(s)

Comprehensive study of solid pharmaceutical tablets in visible, near infrared (NIR), and longwave infrared (LWIR) spectral regions using a rapid simultaneous ultraviolet/visible/NIR (UVN) + LWIR laser-induced breakdown spectroscopy linear arrays detection system and a fast acousto-optic tunable filter NIR spectrometer

Clayton S.C Yang, Feng Jin, Siva R. Swaminathan, Sita Patel, Evan D. Ramer, Sudhir B. Trivedi, Ei E. Brown, Uwe Hommerich, and Alan C. Samuels
Opt. Express 25(22) 26885-26897 (2017)

Broadband photon time-of-flight spectroscopy of pharmaceuticals and highly scattering plastics in the VIS and close NIR spectral ranges

Dmitry Khoptyar, Arman Ahamed Subash, Sören Johansson, Muhammad Saleem, Anders Sparén, Jonas Johansson, and Stefan Andersson-Engels
Opt. Express 21(18) 20941-20953 (2013)

Application of spatially modulated near-infrared structured light to study changes in optical properties of mouse brain tissue during heatstress

Oren Shaul, Michal Fanrazi-Kahana, Omri Meitav, Gad A. Pinhasi, and David Abookasis
Appl. Opt. 56(32) 8880-8886 (2017)

Sulfur as a proposed near infrared reflectance standard

Russell Tkachuk and Fred D. Kuzina
Appl. Opt. 17(17) 2817-2820 (1978)

Effects of prestrain applied to poly(ethylene terephthalate) substrate on microstructures and morphologies of porous TiO₂ film and optical scattering behaviors of light

Tse-Chang Li, Cheng-Fang Ho, and Jen-Fin Lin
Appl. Opt. 54(4) 816-827 (2015)