Abstract
A theoretical analysis for a new high-sensitivity pressure sensor based on the surface plasmon resonance (SPR) phenomenon is presented. The device consists a thin metal film deposited on the cladding of a U-shaped optical fiber probe embedded in a silicon rubber block. When the block is under pressure, the bending radius will vary and consequently a shift on the SPR wavelength can be noticed and converted to pressure units. Theoretical simulations using the transfer matrix formalism and the N-layer U-shaped fiber model were developed and implemented for three different metals: gold, copper, and silver. A resolution of 5.9 × 10−4, 6.3 × 10−4, and 1.3 × 10−3 kPa can be expected for gold, copper, and silver, respectively for a working range up to 0.12 MPa. The proposed structure reveals to be suitable to high-sensitivity pressure measurements, including industrial operating machinery and R&D applications.
© 2015 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription