Abstract

Spatial resolution improvement from an acquired measurement using long pulse is developed for Brillouin optical time domain analysis (BOTDA) systems based on the total variation deconvolution algorithm. The frequency dependency of Brillouin gain temporal envelope is investigated by simulation, and its impact on the recovered results of deconvolution algorithm is thoroughly analyzed. To implement a reliable deconvolution process, differential pulse-width pair (DPP) technique is utilized to effectively eliminate the systematic Brillouin frequency shift (BFS) distortion stemming from the frequency dependency of temporal envelope. The width of the pulse pairs should be larger than 40 ns as is analyzed theoretically and verified experimentally. It has been demonstrated that the proposed method can realize flexible adjustment of spatial resolution with enhanced signal-to-noise ratio (SNR) from an established measurement with long pump pulse. In the experiment, the spatial resolution is increased to 0.5 m and 1 m with high measurement accuracy by using the deconvolution algorithm from the measurement of 60/40 ns DPP signals. Compared with the raw DPP results with the same spatial resolution, 7.9 dB and 5.9 dB SNR improvements are obtained for 0.5 m and 1 m spatial resolution respectively, thanks to the denoising capability of the total variation deconvolution algorithm. The impact of sampling rate on the recovery results is also studied. The proposed sensing system allows for distortion-free Brillouin distributed sensing with higher spatial resolution and enhanced SNR from the conventional DPP setup with long pulse pairs.

Enhancing spatial resolution of BOTDR sensors using image deconvolution

Haoting Wu, Nan Guo, Danqi Feng, Guolu Yin, and Tao Zhu
Opt. Express 30(11) 19652-19664 (2022)

Optimization of a DPP-BOTDA sensor with 25 cm spatial resolution over 60 km standard single-mode fiber using Simplex codes and optical pre-amplification

Marcelo A. Soto, Mohammad Taki, Gabriele Bolognini, and Fabrizio Di Pasquale
Opt. Express 20(7) 6860-6869 (2012)

Differential Brillouin gain for improving the temperature accuracy and spatial resolution in a long-distance distributed fiber sensor

Yongkang Dong, Xiaoyi Bao, and Wenhai Li
Appl. Opt. 48(22) 4297-4301 (2009)

2 cm spatial-resolution and 2 km range Brillouin optical fiber sensor using a transient differential pulse pair

Yongkang Dong, Hongying Zhang, Liang Chen, and Xiaoyi Bao
Appl. Opt. 51(9) 1229-1235 (2012)

Differential pulse-width pair BOTDA for high spatial resolution sensing

Wenhai Li, Xiaoyi Bao, Yun Li, and Liang Chen
Opt. Express 16(26) 21616-21625 (2008)