Abstract

Environmental temperature fluctuations cause phase changes of the light propagating through optical fibers due to their thermal sensitivity. This limits the stability of fiber delay-line interferometers. Here, we present a thermally-insensitive fiber Mach-Zehnder interferometer. It consists of a hollow core fiber (HCF), which has a low thermal sensitivity coefficient, in one branch and a standard single-mode fiber with a thermal sensitivity coefficient about 25 times larger in the other. By setting their associated length ratio to approximately 25:1, the optical phase of the light in both arms changes by the same amount with temperature, making the difference in their optical paths insensitive to temperature and thus producing thermally-insensitive interference. As the thermal sensitivity coefficient of the optical fibers is itself slightly temperature dependent, exactly-zero sensitivity is achieved at a specific temperature only. We show how this zero-sensitivity temperature can be controlled via control of the relative fiber lengths in the two interferometer arms and set it to room temperature. Further, we show that our interferometer is over 100 times less sensitive to temperature than a single-mode fiber-based interferometer over temperature range as large as 25–50 °C. When considering a simple temperature control that keeps the interferometer within ±1 °C, the demonstrated interferometer achieves over 2000 times lower thermal sensitivity than a single-mode fiber-based interferometer and over 100 times lower sensitivity than an HCF-only based interferometer. Finally, we discuss how the thermal sensitivity of such interferometer depends on the light source wavelength.

Temperature insensitive fiber interferometry

W. Zhu, E. R. Numkam Fokoua, Y. Chen, T. Bradley, M. N. Petrovich, F. Poletti, M. Zhao, D. J. Richardson, and R. Slavík
Opt. Lett. 44(11) 2768-2770 (2019)

Hollow-core fiber with stable propagation delay between −150°C and +60°C

Zitong Feng, Hesham Sakr, John R. Hayes, Eric Numkam Fokoua, Meng Ding, Francesco Poletti, David J. Richardson, and Radan Slavík
Opt. Lett. 48(3) 763-766 (2023)

Hollow-core fiber Fabry–Perot interferometers with reduced sensitivity to temperature

Meng Ding, Eric Numkam Fokoua, John R. Hayes, Hesham Sakr, Peter Horak, Francesco Poletti, David J. Richardson, and Radan Slavík
Opt. Lett. 47(10) 2510-2513 (2022)

Thinly coated hollow core fiber for improved thermal phase-stability performance

Bo Shi, Hesham Sakr, John Hayes, Xuhao Wei, Eric Numkam Fokoua, Meng Ding, Zitong Feng, Giuseppe Marra, Francesco Poletti, David J. Richardson, and Radan Slavík
Opt. Lett. 46(20) 5177-5180 (2021)

Temperature-insensitive optical fiber two-dimensional micrometric displacement sensor based on an in-line Mach–Zehnder interferometer

Chuan Zhong, Changyu Shen, Yang You, Jinlei Chu, Xin Zou, Xinyong Dong, Yongxing Jin, and Jianfeng Wang
J. Opt. Soc. Am. B 29(5) 1136-1140 (2012)