Abstract

Near infrared (NIR) spectroscopy has been used to predict the modulus of elasticity (stiffness) of samples taken from knot-free sapwood specimens of radiata pine (Pinus radiata D. Don). The method shows the potential of using NIR spectroscopy for assessment of lumber stiffness. A model based on NIR spectra taken on the radial face of 404 samples of radiata pine clearwood was established to predict stiffness. Samples were moved past the detector at a rate of 900 mm min⁻¹. This model then was used to predict the stiffness of a further 80 samples and the results show an error in prediction of 14% of the mean measured value.

© 2001 NIR Publications

Pattern recognition of visible and near-infrared spectroscopy from bayberry juice by use of partial least squares and a backpropagation neural network

Haiyan Cen, Yidan Bao, and Yong He
Appl. Opt. 45(29) 7679-7683 (2006)

Nondestructive determination of SSC in an apple by using a portable near-infrared spectroscopy system

Yizhe Zhang, Jipeng Huang, Qiulei Zhang, Jinwei Liu, Yanli Meng, and Yan Yu
Appl. Opt. 61(12) 3419-3428 (2022)

Spatial mapping of proteoglycan content in articular cartilage using near-infrared (NIR) spectroscopy

Isaac O. Afara, Hayley Moody, Sanjleena Singh, Indira Prasadam, and Adekunle Oloyede
Biomed. Opt. Express 6(1) 144-154 (2015)

Combination of near-infrared spectroscopy with Wasserstein generative adversarial networks for rapidly detecting raw material quality for formula products

Xiaowei Xin, Junhua Jia, Shunpeng Pang, Ruotong Hu, Huili Gong, Xiaoyan Gao, and Xiangqian Ding
Opt. Express 32(4) 5529-5549 (2024)

Rapid determination of the main components of corn based on near-infrared spectroscopy and a BiPLS-PCA-ELM model

Lili Xu, Jinming Liu, Chunqi Wang, Zhijiang Li, and Dongjie Zhang
Appl. Opt. 62(11) 2756-2765 (2023)