Abstract

Polarization-diversity couplers are promising industrially scalable optical devices that can couple optical signals with unknown polarization states into silicon photonic chips. Here we propose a novel, to the best of our knowledge, two-dimensional (2D) metagrating coupler (MGC) for the polarization-diversity system, which improves its coupling efficiency for both polarizations. Compared with the previously reported 2D grating couplers (GCs) with identical grating cells, the proposed apodized design gradually changes the aspect ratio and orientation angles of the elliptical patterns simultaneously. This 2D array of the varied grating cells modulates the diffracted mode field patterns and phases locally, and achieves a better overlap with the Gaussian fiber modes for both polarizations. The peak coupling loss (PCL) for the S-polarized and P-polarized light are ${-}{1.6}\;{\rm{dB}}$ and ${-}{2.7}\;{\rm{dB}}$, respectively. The calculated polarization dependent loss is lower than 0.2 dB from 1522 nm to 1540 nm. The device is robust to the fabrication tolerance and fiber misalignment. The simulated fabrication tolerance analysis show that the etch depth error of ±20 nm results in less than 0.3 dB and 0.1 dB PCL drop, while the grating cell feature size error of ${{\pm 40}}\;{\rm{nm}}$ results in less than 0.6 dB and 0.2 dB PCL drop for both types of polarization light, respectively. The fiber misalignment should be within the range from ${-}{{2}}\;{\rm{\unicode{x00B5}{\rm m}}}$ to ${+}{{2}}\;{\rm{\unicode{x00B5}{\rm m}}}$ in two perpendicular directions, and the coupling angle deviation should be within the range from ${-}{{3}}^\circ$ to ${+}{{3}}^\circ$, in order to assure 0.5 dB penalty loss for both polarizations. The performance of the design is insensitive to the mask misalignments. To assure 0.5 dB penalty loss for both polarizations, $\Delta \theta$ is suggested to be within the range from ${-}{{3}}^\circ$ to ${+}{{3}}^\circ$.

© 2022 Optica Publishing Group

Two-dimensional silicon photonic grating coupler with low polarization-dependent loss and high tolerance

Yanyun Xue, Hao Chen, Yujin Bao, Jianji Dong, and Xinliang Zhang
Opt. Express 27(16) 22268-22274 (2019)

Two-dimensional grating coupler on silicon with a high coupling efficiency and a low polarization-dependent loss

B. Chen, X. Zhang, J. Hu, Y. Zhu, X. Cai, P. Chen, and L. Liu
Opt. Express 28(3) 4001-4009 (2020)

Optimizing polarization-diversity couplers for Si-photonics: reaching the −1dB coupling efficiency threshold

Lee Carroll, Dario Gerace, Ilaria Cristiani, and Lucio C. Andreani
Opt. Express 22(12) 14769-14781 (2014)

Two-dimensional grating coupler on an X-cut lithium niobate thin-film

Bin Chen, Ziliang Ruan, Jinyao Hu, Jingyi Wang, Chao Lu, Alan Pak Tao Lau, Changjian Guo, Kaixuan Chen, Pengxin Chen, and Liu Liu
Opt. Express 29(2) 1289-1295 (2021)

High-efficiency dual-layer grating coupler for vertical fiber-chip coupling in two polarizations

Ke Li, Jingping Zhu, Qihang Duan, and Xun Hou
J. Opt. Soc. Am. A 40(6) 1022-1028 (2023)