Abstract
We have developed and tested a multichannel fiber-optic Raman-effect amplifier with peak output power of the order of 10 W operating at the wavelength of 1653 nm. This amplifier is intended for use in a remote-sensing lidar for atmospheric methane and consists of three power amplifiers, each with an output power of more than 3 W. The output from these amplifiers was combined in a fiber-optic multiplexer and then fed to the lidar transmitter collimator. Our modeling of a single power amplifier indicated that the Raman conversion efficiency is improved when thin-core optical fibers are used; a thin-core optical fiber can be used to decrease both the pump power and the length of the optical fiber. We describe the seed light source spectrum and the multichannel amplifier output spectrum. The output power can be increased beyond 20 W by multiplexing in another four power amplifiers, which would provide sufficient lidar transmitter power to measure gas concentrations from a spacecraft in low-Earth orbit.
© 2020 Optical Society of America
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription