Add to BibSonomy
Abstract
A multimode fiber surface plasmon resonance sensor based on a down–up taper for refractive index measurement is proposed and demonstrated. The device is fabricated by splicing two multimode fibers in a heating and pushing process to form an up taper, followed by heating and pulling the fiber adjacent to the up-taper area to form a down taper, and then using a magnetron sputtering technique to deposit a Cr + Ag layer of 50 nm on the surface of the down–up taper. Such a structure effectively increases the taper ratio and hence improves the measurement sensitivity. The experimental results obtained show that in the refractive index range of 1.345–1.375, the refractive index sensitivity achieved is ∼3264.01 nm/RIU. The device has a compact size and its entire length is ∼2.75 mm. Moreover, the robustness of the device is better than that of the previously reported fiber surface plasmon resonance sensors due to its relatively large waist diameter of 40 µm for the down taper. The device is expected to have potential applications in biological and chemical sensing.
© 2022 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Woo-Hu Tsai, Yu-Chia Tsao, Hong-Yu Lin, and Bor-Chiou Sheu
Opt. Lett. 30(17) 2209-2211 (2005)
Yunfang Zhang, Changrui Liao, Chupao Lin, Yu Shao, Ying Wang, and Yiping Wang
Opt. Lett. 44(10) 2434-2437 (2019)
Vivek Semwal and Banshi D. Gupta
Appl. Opt. 58(15) 4149-4156 (2019)