Abstract

This paper introduces a fiber-optic microelectromechanical system (MEMS) seismic-grade accelerometer that is fabricated by bulk silicon processing using photoresist/silicon dioxide composite masking technology. The proposed sensor is a silicon flexure accelerometer whose displacement transduction system employs a light intensity detection method based on Fabry–Perot interference (FPI). The FPI cavity is formed between the end surface of the cleaved optical fiber and the gold-surfaced sidewall of the proof mass. The proposed MEMS accelerometer is fabricated by one-step silicon deep reactive ion etching with different depths using the composite mask, among which photoresist is used as the etching-defining mask for patterning the etching area while silicon dioxide is used as the depth-defining mask. Noise evaluation experiment results reveal that the overall noise floor of the fiber-optic MEMS accelerometer is 2.4 ng/$\sqrt {{\rm Hz}}$ at 10 Hz with a sensitivity of 3165 V/g, which is lower than that of most reported micromachined optical accelerometers, and the displacement noise floor of the optical displacement transduction system is 208 fm/$\sqrt {{\rm Hz}}$ at 10 Hz. Therefore, the proposed MEMS accelerometer is promising for use in high-performance seismic exploration applications.

© 2022 Optical Society of America

2 ng/√Hz-resolution optomechanical accelerometer employing a three-dimensional MEMS interferometer

Cheng Li, Bo Yang, Xiang Zheng, Xin Guo, Zhenyu Sun, Luqiang Zhou, and Xin Huang
Opt. Lett. 47(7) 1883-1886 (2022)

Compact diaphragm-based optical accelerometers with µg/√Hz resolution

Behrad Habib Afshar and Michel J. F. Digonnet
Opt. Lett. 45(14) 3933-3936 (2020)

Coarse-to-fine optical MEMS accelerometer design and simulation

Mojtaba Rahimi, Majid Taghavi, and Mohammad Malekmohammad
Appl. Opt. 61(2) 629-637 (2022)

Common-mode noise self-suppressed 3-component fiber optic accelerometer based on low-reflectivity Bragg gratings

Fei Liu, Duo Yi, Yi Chen, Ping Xu, Min Zhang, Xuewen Zhu, Xiangge He, Xian Zhou, and Keping Long
Opt. Lett. 46(7) 1596-1599 (2021)

High-accuracy transient response fiber optic seismic accelerometer using a shock-absorbing ring as a mechanical antiresonator

Yi Duo, Liu Fei, Zhang Min, and Tao Qingchang
Opt. Lett. 44(2) 183-186 (2019)