Abstract
Practical imaging constraints restrict the number of wavelengths that can be measured in a single Bioluminescence Tomography imaging session, but it is unclear which set of measurement wavelengths is optimal, in the sense of providing the most information about the bioluminescent source. Mutual Information was used to integrate knowledge of the type of bioluminescent source likely to be present, the optical properties of tissue and physics of light propagation, and the noise characteristics of the imaging system, in order to quantify the information contained in measurements at different sets of wavelengths. The approach was applied to a two-dimensional simulation of Bioluminescence Tomography imaging of a mouse, and the results indicate that different wavelengths and sets of wavelengths contain different amounts of information. When imaging at a single wavelength, 580nm was found to be optimal, and when imaging at two wavelengths, 570nm and 580nm were found to be optimal. Examination of the dispersion of the posterior distributions for single wavelengths suggests that information regarding the location of the centre of the bioluminescence distribution is relatively independent of wavelength, whilst information regarding the width of the bioluminescence distribution is relatively wavelength specific.
© 2013 SPIE
PDF ArticleMore Like This
James A. Guggenheim, Hector R. A. Basevi, Iain B. Styles, Jon Frampton, and Hamid Dehghani
87990G European Conference on Biomedical Optics (ECBO) 2013
Iain B. Styles, Hector R.A. Basevi, James A. Guggenheim, and Hamid Dehghani
87990J European Conference on Biomedical Optics (ECBO) 2013
H.R.A. Basevi, J.A. Guggenheim, S.L. Taylor, H. Dehghani, and I.B. Styles
BM3A.45 Biomedical Optics (BIOMED) 2014