Abstract
In modern day low-loss, single-mode fiber, the maximum information transmission rate is determined by chromatic dispersion. At most carrier wavelengths, the pulse broadening dispersion effect can be adequately described by the second order dispersion coefficient β" = ∂2β/∂ω2, where β is the propagation constant. One way to avoid the spreading of the pulse transmitted by the fiber is to operate at the so called zero dispersion wavelength, at which the second order dispersion vanishes, β" = 0. For pure silica fiber, this wavelength is 1.27 μm. However, even at this wavelength, it has been shown1 that higher order dispersion can cause significant pulse broadening. Another method to counter the dispersion, proposed by Hasegawa and Tappert,2 is to make use of the nonlinearity of the refractive index, the Kerr effect, to balance the second order dispersion. Soliton pulses could then be generated which propagate without dispersive broadening. Recent experiments3 have shown the feasibility of this idea by demonstrating the propagation of solitons in the anomalous dispersion region of a single-mode silica fiber. However, whether such balance would occur between the nonlinearity and the higher order dispersion at the zero dispersion wavelength is unclear.
© 1986 Optical Society of America
PDF ArticleMore Like This
CURTIS R. MENYUK, P. K. A. WAI, H. H. CHEN, and Y. C. LEE
WGG21 International Quantum Electronics Conference (IQEC) 1986
P. K. A. WAI, CURTIS R. MENYUK, Y. C. LEE, and H. H. CHEN
WGG19 International Quantum Electronics Conference (IQEC) 1986
P. K. A. WAI, C. R. MENYUK, H. H. CHEN, and Y. C. LEE
WMM5 International Quantum Electronics Conference (IQEC) 1987