Abstract

We propose a new non-intrusive flow measurement method using the distributed feedback fiber laser (DFB-FL) as a sensor to monitor flow in the pipe. The relationship between the wavelength of the DFB-FL and the liquid flow rate in the pipeline is derived. Under the guidance of this theory, the design and test of the flow sensor is completed. The response curve is relatively flat in the frequency range of 10 Hz to 500 Hz, and the response of the flow sensor has high linearity. The flow from 0.6 m³/h to 25.5 m³/h is accurately measured under the energy analysis method in different frequency intervals. A minimum flow rate of 0.046 m/s is achieved. The experimental results demonstrate the feasibility of the new non-intrusive flow measurement method based on the DFB-FL and accurate measurement of small flow rates.

© 2020 Chinese Laser Press

Optical fiber flow sensor based on a lever–hinge configuration

Dongyu Zhang, Yan Bai, Guoquan Liu, Qiang Chen, and Xueguang Qiao
Appl. Opt. 62(16) 4268-4274 (2023)

Fiber Bragg grating accelerometer-based nonintrusive flow rate measurements and leak detection

Ke Jiang, Lei Liang, Chenghui Hu, and Xiaobin Liu
Appl. Opt. 59(34) 10680-10687 (2020)

Polarimetric distributed feedback fiber laser sensor for simultaneous strain and temperature measurements

Oliver Hadeler, Erland Rønnekleiv, Morten Ibsen, and Richard I. Laming
Appl. Opt. 38(10) 1953-1958 (1999)

Design and fabrication of a differential-pressure optical fiber grating sensor for monitoring the flow rate of fluid

Bo Wang, Yan Bai, Qiang Chen, Hong Gao, Dongyu Zhang, Lirong Jiang, and Xueguang Qiao
Appl. Opt. 62(2) 385-390 (2023)

Fiber Bragg grating thermometry application to measure flow: laminar and turbulent regimes

Rodolfo Luiz Patyk, Leandro Grabarski, and Hypolito José Kalinowski
Appl. Opt. 62(16) E92-E95 (2023)