Abstract
With the rapid development of laser technology, laser as the light source of night vision illuminating can realize long-distance and clear imaging, which has been widely used in laser active illuminating field. A high-power diode laser with a wavelength of 808 nm was designed as the laser active illuminating source, and the output power of no less than 100 W was obtained by spatial beam multiplexing, polarization multiplexing, and high efficiency fiber coupling techniques. In view of the beam homogenization of illuminating source, a novel beam homogenization system based on waveguide is proposed in this work. A square spot with a horizontal divergence angle of 40°, a vertical divergence angle of 10°, and an illuminating power ratio of 4:1 was obtained by a collimating lens. Comparing with the traditional circular illuminating beam, the square illuminating beam can match the illuminating angle of CCD camera better, and the energy utilization rate is higher. In addition, by optimizing the structure of waveguide and collimating lens, the illuminating angle can be changed to meet the illuminating requirements under different conditions theoretically.
© 2023 Chinese Laser Press
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription