Abstract

We propose an indoor network with a sub-terahertz- band wireless link for 6G applications. In our proposed indoor network, an optical hub unit (OHU) that controls the entire system is optically linked to THz remote nodes (RNs) over optical distribution fibers. The THz RNs communicate with the user equipment through a sub-THz wireless link. The function of the THz RNs is to provide an interface between the optical link and the sub-THz wireless link. For downlink transmission, a photonics-based sub-THz-band signal generation method is adopted to take advantage of the broadband characteristics of the optical components. An electronics-based sub-THz mixer is also used for uplink transmission because of its cost-effectiveness and low energy consumption. A digital signal processor (DSP) is designed to recover the original transmitted baseband signal. The DSP provides frequency offset compensation over a wide frequency range and reduces the probability of cyclic slip. The performance of the proposed system was investigated experimentally with commercially available optical/electrical components. We demonstrate 100 Gb/s 2.5-m wireless transmission with a 16-quadrature amplitude modulation (16-QAM) signal for configuring the downlink. The optical transmission distance was set to 10 km, and the power penalty measured by optical transmission was negligible. We also investigated the scalability and tunability of the photonics-based sub-THz transmitter to confirm the upgradability of our proposed indoor network to consider future capacity expansion. To establish an uplink, a 25 Gb/s 1.5-m wireless transmission with a quadrature phase shift keying (QPSK) signal was employed. A directly modulated laser was used for cost-effective optical transmission. Unlike downstream transmission, a measured bit error rate (BER) penalty caused by the optical transmission was observed. This is due to the interplay between the frequency chirp of the directly modulated laser and the chromatic dispersion in the fiber. Despite this penalty, BERs less than the soft-decision forward error correction (FEC) threshold (2 × 10⁻²) with 20% overhead were achieved. We discuss several remaining technical challenges in real-field deployment. These include THz Tx power improvement, photonic integration, reducing form-factor, polarization insensitivity, and automatic beam steering. Our recent efforts to address these issues are also introduced and examined.

RoF-based indoor distributed antenna system that can simultaneously support 5G mmWave and 6G terahertz services

Sang-Rok Moon, Minkyu Sung, Eon-Sang Kim, Joon Ki Lee, Seung-Hyun Cho, and Joonyoung Kim
Opt. Express 30(2) 1521-1533 (2022)

Symmetrical Full-Duplex Integrated Passive Optical Network and Optical Wireless Communication Transmission System

Yuanquan Wang, Jianjun Yu, and Nan Chi
J. Opt. Commun. Netw. 7(7) 628-633 (2015)

Demonstration of photonics-aided terahertz wireless transmission system with using silicon photonics circuit

Sang-Rok Moon, Seungjun Han, Sanghwa Yoo, Heuk Park, Won-Kyoung Lee, Joon Ki Lee, Jongwoo Park, Kyoungsik Yu, Seung-Hyun Cho, and Joonyoung Kim
Opt. Express 28(16) 23397-23408 (2020)

Full-duplex hybrid optical link with 40 Gbit/s 16-QAM signal for wired or wireless selective access based on polarization division multiplexing

Ruijiao Zhang
Appl. Opt. 61(14) 4005-4012 (2022)

Coherent terahertz wireless communication using dual-parallel MZM-based silicon photonic integrated circuits

Wonkyoung Lee, Seungjun Han, Sang-Rok Moon, Jongwoo Park, Sanghwa Yoo, Heuk Park, Joon Ki Lee, Kyoungsik Yu, and Seung Hyun Cho
Opt. Express 30(2) 2547-2563 (2022)